Product ID:RAPID SET EPOXY WHITE, PART A
MSDS Date:05/01/1991
FSC:8040
NIIN:00N020643
Kit Part:Y
MSDS Number: BLMCX

MORTON INTERNATIONAL BAUER COATINGS FACILITY

1021 N MISSION RD
LOS ANGELES, CA 90033

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 213-225-4154

Cage: DO471

MORTON INTL INC SPECIALTY CHEMICALS GROUP

CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

PROPANE, 1,2-EPOXY-3- (O-TOLYOXY)-; (CRESYLGLYCIDYL ETHER).

CAS: 2210-79-9

RTECS: TZ3700000

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

LD50 LC50 Mixture:ELES CA 900
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:0-424-9300 (CHEMTREC)
213-225-4154
Explanation of Carcinogenicity:NONE SPECIFIED BY MAN
Effects of Overexposure:UFACTURER.


WEAR NIOSH/MSHA APPROVED DUST
MASK; IF TLV EXCEEDED, USE NIOSH/MSHA APPROVED RESPIRATOR.
Medical Cond Aggravated by Exposure:SUFFICIENT TO MAINTAIN BELOW TLV.

First Aid:IMPERVIOUS GLOVES . CHEMICAL WORKERS GOGGLES .
NONE SPECIFIED BY MANUFACTURER.
NONE
SPECIFIED BY MANUFACTURER.
NONE SPECIFIED BY MAN

Flash Point Method:TCC
Flash Point:240F,116C
Extinguishing Media:USE CHEMMICAL FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER FROM FOG NOZZLES MAY BE USED TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:FULL PROTECTIVE EQUIP, INCLUDING SCBA, IS
RECOMMENDED. WATER FROM FOG NOZZLES MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILDUP.

Spill Release Procedures:UFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 120 F. DO NOT CUT, GRIND,
WELD, OR DRILL NEAR THIS CONTAINER.
Other Precautions:AVOID EXP TO VAPS. GROUND CNTNR WHILE POURING. MIN
DISTANCE OF FREE FALL TO AVOID STATIC ELEC GEN. CNTNRS, EVEN THOSE
THAT HAVE BEEN EMPTIED, WILL RETAIN PROD RESIDUE & VAPS. ALWAYS
OBEY HAZ WARNINGS & HNDL CNTNRS AS IF THEY WERE FULL.

Respiratory Protection:VENT WORKING SPACES TO BELOW THRESHOLD LIMIT
VALUE. IF LOCAL EXHAUST NOT AVAILABLE, USE NIOSH/MSHA APPROVED
RESPIRATORY DEVICE.
Ventilation:LOCAL EXHAUST TO MAINTAIN VAPOR CONCENTRATION BELOW
THRESHOLD LIMIT VALUE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH CONTAM CLTHG BEFORE REUSE.
DISCARD SHOES IF SATURATED. WHEN PART A IS MIXED W/PART B AN (SUPP
DATA)
Supplemental Safety and Health
EFTS OF OVEREXP: SHOWED THAT LUNG CLEARANCE MECHANISM WAS OVERWHELMED &
THAT RSLTS AT MASSIVE 250 MG/M3 LEV ARE NOT RELEVANT TO WORKPLACE.
HYGIENE PRACT: EXOTHERMIC RXN OCCURS WHICH WILL PRDCE TEMPS I N
EXCESS OF 200 F. ADTNL PROT EQUIPMENTMUST BE WORN TO PROPERLY
HANDLE THIS PRODUCT MIX.

HCC:N1
Vapor Pres:SEE ING 2
Vapor Density:HVR/AIR
Spec Gravity:1.4771
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:RAPID SET EPOXY WHITE, PART A
KMJ01MAY9104AUG95
Conditions to Avoid Polymerization:MORTON INTERNATIONAL BAUER COATINGS
FACILITY 1021 N MISSION RD LOS ANG

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL,
STATE, AND FEDERAL REGULATIONS. DO NOT INCINERATE IN CLOSED
CONTAINER. COMPLY WITH ALL APPLICABLE GOVERNMENTAL REGULATIONS ON
SPILL REPORTING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.